FULLY AUTO VERTICAL CLEAN IC45-AV - Centrifuge
Removes porous or sticky solids that are non-gelatinous and normally found difficult to remove.
Weighted system detects a change in weight when the bowl is full and automatically discharges the solids.
Designed for continuous uninterrupted process set to operate unattended.
Available in 2.2kw single phase for light work and 4kw 3 phase for heavy duty requirements.
IC45 Centrifuges are high quality units engineered for super efficient separation of solids from liquids. The rotating stainless steel bowl is dynamically balanced for extra smooth operation, encased by heavy machined cast bowl and lid including 4 point dampeners for vibration isolation. The Interfil Centrifuge is able to separate solids from industrial oils, waste vegetable oils, emulsions, solvents and many other industrial processes. The Interfil IC-45 oil and liquid centrifuge units will generate up to 3,000 gravitational centrifugal forces.
- Flow Rate 0 – 4800 Litres per hour (1270Gph)
- Bowl (Rotor) holding Capacity 6 litres (200 oz) of liquid
- Automatic Removal of Solids
- Single Phase and 3 Phase power supply options
Typical Centrifuge Flow Rates
Flow rate given are an indication only and is subject to several factors such as viscosity of liquid, temperature of liquid, percentage of solids ppm, particle size um and difference in specific gravity sg.
|Waste Vegetable Oil (dependent on the oil being cleaned)||300 Litres per hour – 1500 Litres per hour (80 – 400GPH)|
|Engine Oil||300 Litres per hour (80 GPH)|
|Biodiesel||1780 Litres per hour (475 GPH)|
|Rape Seed and Canola Oil||190 Litres per hour (50 GPH)|
|Grape Juice/Wine||3800 Litres per hour (1000 GPH)|
|Gold and Silver Recovery||600 Litres per hour (160 GPH)|
|Grinding Coolant||3800 Litres per hour (1000 GPH)|
|Waste Water||3800 Litres per hour (1000 GPH)|
|Core Drilling Mud||3800 Litres per hour (1000 GPH)|
- High Speed Precision Balanced bowl for Greater Separation
- 304 Stainless Steel Heavy Duty Bowl
- 4 Point Vibration Isolation Points Super Quiet Operation
- No Wearable Parts
- Automatic Solid Removal
- Quick Easy Removal of the Bowl
The units are currently being used successfully in many industrial applications and more recently the mining industry for core drilling rigs. The units are cost effective, many paying for themselves within a few months. Their superior design offers improved performance, a longer trouble free operating life, and provides low maintenance more so than any other centrifuge available on the market today.
Benefits of the Interfil IC-45 Centrifuge
- Choice of Manual and Fully Automated Self Cleaning Centrifuges
- Easy Bowl Removal
- Compact Design
- One Pass Separation
The Interfil IC-45 Centrifuge works with the use of centrifugal force, allowing separation of any solid particles from liquid. The centrifugal force has a maximum 3,000 gravities. The separation of solids is greatly improved when the liquid is exposed longer to the centrifugal force. This can be achieved by simply slowing the supply rate to the centrifuge. Extended retention time enables improved clarity and cleanliness in the end product. There are several factors that are considered when determining the flow rate through the centrifuge, these include:
- Viscosity of the liquid (can be changed by increasing or decreasing the temperature)
- The amount of solids present in the liquid
- Particle size
- Difference in specific gravity of the liquid and the solids
The liquid is fed through an inlet connection in the lid of the centrifuge, entering directly into the rotating bowl where the centrifugal force then throws the solids out of the liquid and to the side of the bowl. The solid content then becomes compacted as a sludge mixture, and the clean liquid then flows up the center of the bowl and discharges by gravity through a 2″ outlet at the bottom of the Centrifuge. The solids left in the bowl can then be removed manually or ideally removed automatically by means of the self cleaning device.
|Bowl capacity (solids)||6Ltrs|
|Motor Power||2.2kw or 4kw|
Check our our case study on potato starch here