Base frame with integrated collection trays, doctor blades, pedestals and collection sump – the sump having two (2) ports, each of which is machined to 2 inch BSP female thread.
Mounting holes 14mm dia. are machined into the mounting flanges on a grid 405mm x 205mm to allow mounting with 1/2 inch diameter bolts.
3ph, 50 hz, 415 volt, 0.18kw, 4 pole, 1430 rpm, IP65 insulation, other rated insulations available upon request.
Supplied by vendor steel mill to Interfil’s specification, but falling within the general description of stainless steel. The particular properties attributed to the belt are included within the metal and no surface treatment is employed, thus ensuring life-long retention of the inherent properties.
Normal width – 200mm.
Fabricated into a continuous belt using special equipment designed for the purpose. Standard belts are furnished in increments of 1/2 metre pulley centre distances – special length upon request.
Flanges have overall diameter of 240mm, thus needing a minimum of 250mm fluid depth to allow the tail pulley to operate at the optimum position of fully immersed.
Manufactured from nitrile elastomer and assembled into standard units for ease of removal and replacement
Interfil 2000 specifications
Base overall: 450mm x 320mm
Base overall: 450mm x 450mm
Base overall: 360mm
Base overall: 600mm