Industrial filtration is an indispensable process that’s widely used across different industries, including electronics, chemicals, oil and gas, air and gas, and food and beverages, among others. It’s not only used for water but also other substances like oil, chemicals, and coolants.
Besides being used to filter substances separately, many companies integrate filtration into their manufacturing processes to extend their machine life.
Research has shown that a whopping 70% of damages to machine parts is as a result of wear caused by degradation to the surface. Out of this percentage, corrosion of surfaces account for 20%. When corrosion occurs, the loosened particles circulate through the system and cause damage to other areas. Surprisingly, these particles are harder than the surface they came from, making them quite unfriendly to other machine parts.
The solution to this is the integration of a high-performance filtration process capable of separating all the unwanted particles.
Below are some of the uses of industrial filtration equipment that your business can benefit from.
Protect Equipment Parts
Many mechanical parts get spoilt when foreign particles find their way into water or oil and it’s left to circulate in the system. When these infiltrated substances flow into the complex machine components, they often leave a trail of damages. Some damages are so grave that they can be quiet costly. A precaution is, therefore, necessary. Consider installing an industrial filtration to help remove all the unwanted particles.
Removal of Unwanted Particles
In most stages of the manufacturing process, you may want to isolate a particular substance. For example, in the filtration of used water, all unwanted particles are removed at different levels to remain with clean water. You can also see this in the drilling of oil. As a first step, large particles are filtered out from crude oil before it’s pumped to the surface for further processing.
Chemicals and contaminants are dangerous to both humans and machines. Therefore, the water you use in your industrial setup must be purified.Where there is a need for a lot of water, say in food and beverage production, an industrial filtration would be ideal.
Containing the Spread of Contamination
Water is one of the substances that can easily spread a contaminant. If not treated and purified as soon as it gets contaminated, it might easily get into contact with the human body or another water and contaminate it. The most effective way to address this issue is by installing an industrial filtration system and use it to filter any contaminated water. Advanced filtration equipment can filter even wastewater. These filtration machines aren’t limited to water. They’re available for oil, coolants, and other substances as well.
Improved Machine Efficiency and Performance
In a system where filtration is implemented at different stages, there is increased system efficiency. For example, where a business is using water from a borehole in an industrial process, the water can first be passed through a filter with larger pores before it’s taken through finer filters. By first targeting the larger components, the next level of filtration would be easier, resulting in improved efficiency and better machine performance. For finer results, some filtration processes may also include sludge dewatering to minimise waste as much as possible.
Filtration remains quite useful, and the rate at which manufacturers are acquiring filtration equipment affirms it. As technology advances, more efficient and high performing filtration machines are finding their way into the market.
At Interfil, we are on hand to meet all your industrial cleaning requirements. For your all-in-one filtration solution, call Interfil today on 02 9533 4433.